SteamSignal blue
Created Wednesday 06 August 2014
Connector for data exchange between models with matching parameter characteristic.
1. Purpose of Model
Providing a connector for the exchange of the parameters for pressure, mass flow rate and specific enthalpy between the models of the StaticCycles package
2. Level of Detail, Physical Effects Considered and Physical Insight
2.1 Level of Detail
Referring to Brunnemann et al. [1], this model refers to the level of detail L1.
3. Limits of Validity
Connectors only should be used within the StaticCycles package.
4. Interfaces
The SteamSignal connectors provide following variables for the data exchange between single models:
- Pressure p
- Specific enthalpy h
- Mass flow rate m_flow
5. Nomenclature
6. System Description and General model approach
The SteamSignal_blue connector is used as an inlet port in case of:
- The value of the pressure is computed or set by parameter internally and is provided for neighbour components
- The values of enthalpy and mass flow rate are determined externally and are provided by neighbour components.
The SteamSignal_blue connector is used as an outlet port in case of:
- The value of the pressure is determined externally and is provided by neighbour components
- The values of enthalpy and mass flow rate are computed or set by parameter internally and are provided for neighbour components.
![](./SteamSignal_blue/SteamSignalBlue.png)
7. Remarks for Usage
Components can be connected via the SteamSignal connectors if they have the corresponding inlet and outlet ports with matching colour.
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
Date - Version - Description of changes - author/reviser
Backlinks: ClaRa:StaticCycles ClaRa:StaticCycles:Fittings:Split1 ClaRa:StaticCycles:Fittings:Split2 ClaRa:StaticCycles:Fittings:Split3 ClaRa:StaticCycles:Fittings:Split4 ClaRa:StaticCycles:Storage:Feedwatertank3 ClaRa:StaticCycles:Storage:Feedwatertank4