ThermoPower2ClaRa
Created Montag 25 Juli 2016
This adapter allows connection between the components of ThermoPower.Water and ClaRa's VLE components.
1. Purpose
As shown in the figure below ClaRa's components can be easily coupled to components of the ThermoPower library versions 2.1 and 2.2.
2. Level of Detail, Physical Effects Considered and Physical Insight
2.1 Level of Detail
2.2 Physical Effects Considered
2.3 Level of Insight
3. Limits of Validity
4. Interfaces
4.1 Physical Connectors
5. Nomenclature
6. Governing Equations
7. Remarks for Usage
- Be aware that this only works if the media models used in the respective libraries are compatible with respect to the medium used and the reference point. The adapter is tested with water. The default media provided reflect this and expect to have a water definition in the outer simCenter's parameter fluid1.
- Be aware that ThermoPower 2.2 and below is sensitive to the flow direction, i.e. an inlet port is always to be connected to an inlet port and vice versa. Consider also ClaRa2ThermoPower to ensure correct connector couplings
8. Validation
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
- 18.04.2013 - 1.0.0 - Initial implementation - Friedrich Gottelt, XRG Simulation GmbH
Backlinks: ClaRa:Components:Adapters:ClaRa2ThermoPower