Scalar2VectorHeatPort
Created Montag 25 Juli 2016
Connect a scalar heat port with a vectorised heat port
1. Purpose
This components allows to connect components with scalar and vectorised heat ports. A common example is the connection of a furnace component (e.g. Components:Furnace:FlameRoom) to a discretisied pipe (e.g. Components:VolumesValvesFittings:Pipes:PipeFlowGas L4 Simple).
2. Level of Detail, Physical Effects Considered and Physical Insight
2.1 Level of Detail
2.2 Physical Effects Considered
2.3 Level of Insight
3. Limits of Validity
4. Interfaces
4.1 Physical Connectors
Basics:Interfaces:GasPortOut flueGas_outlet
Basics:Interfaces:Fuel outlet fuel_outlet
Basics:Interfaces:Slag outlet slag_outlet
Basics:Interfaces:FuelSlagFlueGas inlet fuelSlagFlueGas_inlet
5. Nomenclature
6. Governing Equations
Equal Heat Flow Rates
Equal Temperatures
7. Remarks for Usage
- The option equalityMode = "Equal Heat Flow Rates" may lead to alternating heat temperatures while equalityMode = "Equal Temperatures" may lead to high heat flow rate gradiants, depending on the discretisation scheme. However, we recommend the latter alternative, which is the default.
8. Validation
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
- 16.08.2013 - Version 1.0 - Initial implementation - J.Brunnemann, F.Gottelt, XRG Simulation GmbH