Physical Model
Created Thursday 26 July 2012
Short description of the model
1. Purpose of Model
description of typical application cases
2. Level of Detail, Physical Effects Considered and Physical Insight
classification according to the Modelica Paper 2012...
2.1 Level of Detail
Referring to Brunnemann et al. [1], this model refers to the level of detail L2 because the system is modelled with the use of balance equations, which are spatially averaged over the component.
2.2 Physical Effects Considered
2.3 Level of Insight
- The above mentioned physical effects are available in different levels of insight, which shall be mentioned and linked.
3. Limits of Validity
...
4. Interfaces
5. Nomenclature
a table referencing the nomenclature in the source code, the descriptions of variables and the "human-readable" , use the following latex table template and respect the overall textwidth of 150mm:
\renewcommand{\arraystretch}{1.25}
\begin{longtable}{||p{65mm}|p{20mm}|p{65mm}||}
\hline \multicolumn{1}{||p{65mm}|}{\textbf{Source Code}} & \multicolumn{1}{p{20mm}|}{\textbf{Variable ClaRa}} & \multicolumn{1}{p{65mm}||}{\textbf{Description}} \\ \hline\hline
\endfirsthead
\multicolumn{3}{r}%
{Nomenclature -- continued from previous page} \\
\hline \hline \multicolumn{1}{||p{65mm}|}{\textbf{Source Code}} & \multicolumn{1}{p{20mm}|}{\textbf{Variable ClaRa}} & \multicolumn{1}{p{65mm}||}{\textbf{Description}} \\ \hline
\endhead
\hline \multicolumn{3}{r}Continued on next page \\ \hline
\endfoot
\hline
\endlastfoot
\texttt{Delta\_h\_vap} & $\Delta hvap$ & Heat of vapourisation $[J/kg]$ \\\hline
\end{longtable}
6. Governing Equations
6.1 System Description and General Modelling Approach
6.2 General Model Equations
Energy Conservation
case a)
- foo
- bar
case b)
Mass Conservation
7. Remarks for Usage
8. Validation
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011 - 2020.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/CLA
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
- Date - Version - Description of changes - author/revisor
Backlinks: ZIM DocumentationTemplate:Creating Nice ClaRa Documentation