HopperSlice L4
Created Donnerstag 03 September 2020
A hopper model with dynamic mass and energy balance considering heat exchange with neighbouring furnace models and cooled walls.
1. Purpose of Model
This model is well suited to model the hopper of a boiler. In combination with other models of the package SubSystems.Furnace a 1-dimensional boiler model can be developed which is discretised in flow direction.
This model combines the typical models which are used when the user builds up a furnace model to improve the usability. The time for parametrization and connection of different models is greatly reduced. The parametrization of the subcomponents is located on toplevel of this model.
The combined model consists of the following components:
Components:Furnace:Hopper
Basics:ControlVolumes:SolidVolumes:CylindricalThinWall L4
Components:VolumesValvesFittings:Pipes:PipeFlow L4 Simple
2. Level of Detail, Physical Effects Considered and Physical Insight
2.1 Level of Detail
Referring to Brunnemann et al. [1], this model refers to the level of detail L2.
3. Limits of Validity
For details of the limits of validity please have a look in the documentation of the subcomponents used in this model.
4. Interfaces
4.1 Physical Connectors
Basics:Interfaces:FuelSlagFlueGas outlet outletFG
Basics:Interfaces:HeatPort a heat_top
Basics:Interfaces:FluidPortIn inlet_FTW
Basics:Interfaces:FluidPortOut outlet_FTW
5. Nomenclature
6. Governing Equations
For details of the governing equations please have a look in the documentation of the subcomponents used in this model.
7. Remarks for Usage
8. Validation
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
Friedrich Gottelt, Forschungszentrum für Verbrennungsmotoren und Thermodynamik Rostock GmbH , Copyright 2019-2020
Remarks:
This component was developed by Forschungszentrum für Verbrennungsmotoren und Thermodynamik Rostock GmbH for industry projects in cooperation with Lausitz Energie Kraftwerke AG, Cottbus.
Acknowledgements:
This model contribution is sponsored by Lausitz Energie Kraftwerke AG.
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
2020.09.01 - v 0.1 - initial implementation - Friedrich Gottelt, Forschungszentrum für Verbrennungsmotoren und Thermodynamik Rostock GmbH
Backlinks: ClaRa:A User Guide:Revisions:v1.6.0 ClaRa:SubSystems:Furnace:HopperSlice L4 AdditionalAir