Denitrification L2

Created Wednesday 15 October 2014

Basic model of a desulfurization component build up from a flue gas cell and a replaceable model for a denitrification reaction

1. Purpose of Model


The model is used as a basic model to simulate an ideal denitrification facility with fixed separation rate.

2. Level of Detail, Physical Effects Considered and Physical Insight


2.1 Level of Detail


Referring to Brunnemann et al. [1], this model refers to the level of detail L1 as it applies steady state balance equations and simplified characteristics.

2.2 Physical Effects Considered

2.3 Level of Insight


Heat Transfer

• ControlVolumes:Fundamentals:HeatTransport:Generic HT:Adiabat L2
• ControlVolumes:Fundamentals:HeatTransport:Generic HT:IdealHeatTransfer L2
• ControlVolumes:Fundamentals:HeatTransport:Generic HT:Constant L2
• ControlVolumes:Fundamentals:HeatTransport:Generic HT:CharLine L2

Pressure Loss

• ControlVolumes:Fundamentals:PressureLoss:Generic PL:NoFriction L2
• ControlVolumes:Fundamentals:PressureLoss:Generic PL:LinearPressureLoss L2
• ControlVolumes:Fundamentals:PressureLoss:Generic PL:QuadraticNominalPoint L2



Geometry


3. Limits of Validity

4. Interfaces


4.1 Physical Connectors


Basics:Interfaces:GasPortIn inlet
Basics:Interfaces:GasPortOut outlet


5. Governing Equations


5.1 System Description and General model approach


The model is build up from a FlueGasCell and a denitrification model. Please have a look into these models for further details.



Summary

A summary record is available which bundles important component values.

7. Remarks for Usage



9. References

[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012

10. Authorship and Copyright Statement for original (initial) Contribution

Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.

11. Version History

Date - Version - Description of changes - author/revisor
25.06.2014 - v0.1 - initial implementation of the model - Lasse Nielsen, TLK-Thermo GmbH
03.04.2019 - added eye connector



Backlinks: ClaRa:A User Guide:Revisions:v1.4.1 ClaRa:A User Guide:Revisions:v1.7.0