No Friction L4
Created Monday 10 June 2013
The purpose of this model is to model no pressure losses due to friction.
1. Purpose of Model
No deformation of the medium is assumed due to fiction forces between the boundaries of the medium and the medium it self.
2. Physical Insight
This replaceable model is compatible to models of level of detail L4 according to Brunnemann et al. [1].
3. Limits of Validity
4. Interfaces
The model communicates via outer models and records. Thus, it expects to have:
- an outer record named iCom as defined in Basics:Records:IComBase L3
5. Nomenclature
6. Governing Equations
The loop is run from 
to 
7. Remarks for Usage
The model can be used as long as a pressure loss in the component can be neglected.
8. Validation
-
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulationof Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
- 2015 - v 1.0.2 - initial implementation - Timm Hoppe, XRG Simulation
Backlinks: ClaRa:Components:HeatExchangers:FlatTubeFinnedHEXvle2gas L4 ClaRa:Components:HeatExchangers:RegenerativeAirPreheaterSecAir L4 ClaRa:Components:HeatExchangers:RegenerativeAirPreheater L4 ClaRa:Basics:ControlVolumes:FluidVolumes:VolumeVLE L4 Advanced ClaRa:Basics:ControlVolumes:GasVolumes:VolumeGas L4 ClaRa:Components:VolumesValvesFittings:Pipes:PipeFlowGas L4 Simple